How to re-assemble the kit ?

Step 1 : Place the kit in the wash tank and connect it to the quick connector on the pipe.

Step 2 : Run the electric plug through hole without dropping it in the liquid, then pull the electrical cable.

Step 3 : Place the kit in position.

Step 4 : Pull the cable through the back of the parts washer until the coupling on the pipe comes out and block the coupling in the seat on the stainless steel plate.

Step 5 : Make sure that the kit is positioned correctly, then fit the four white screws, one at a time.
WARNING: these screws are fragile. Turn them gently using a screwdriver.