How to empty the parts washer ?

WITH A DRUM EMPTYING PUMP OR ASPIRATOR

Step 1 : Take out the stainless steel plate from the soaking tank, the black washbasin lid, the basket filter and the bag filter.

Step 2 : Put the drum emptying pump or the aspirator in place and drain any waste liquid from the empty drums.

WITHOUT A DRUM EMPTYING PUMP OR ASPIRATOR

Step 1 : Start the emptying process by fitting the tool holder into an empty drum, then run the pump until the min. level is reached.

NOTE : from 4.6 and above, as soon as the level is reached, hold the control button down until the pump is disabled. This will drain off more liquid, making emptying easier.

Step 2 : Lift the parts washer (e.g. using a forklift truck), then release the pipe at the back and take out the lid.

Step 3 : Pour the rest of the waste liquid into the disposal drums.

Step 4 : For optimal finishing, rinse the inside of the parts washer with fresh water and repeat step 3.